Description

Case NZXT H710i – CA-H710 i-B – MID-TOWER ATX CASE PC Gaming

• NEW FEATURES: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.

• SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.

• VERTICAL GPU MOUNTING: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically *PCIe riser card not included.

• ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.

• SPECS: Max GPU Clearance: 413mm, Radiaor Support – Front: 360mm, Top: 360mm, Rear: 140mm.

H710i

MID-TOWER ATX CASE

The mid-tower H710 and H710i ATX cases are a builder’s dream with plenty of space for almost any build. There are two 360mm radiator locations (top and front), seven 120/140mm fan mounts, a removable/repositionable 3+1 3.5” HDD cage, five 2.5” drive trays, and front USB 3.1 Gen 2 type-C for a truly epic system.

• Includes USB 3.1 Gen 2-compatability and USB-C connector.
• Everything builders loved in the original H Series alongside incredible updates.
• Cable-routing kit and pre-installed channels make wiring easy.
• Make the best use of space in your build.
• The new smart device V2 includes a faster micro processor.
• Clean, modern design with uninterrupted tempered glass.

	H710i	h510 elite	h510i	h210i
Dimensions	W: 230mm H: 494mm D: 494mm (Without Feet)	W: 210mm H: 460mm D: 428mm (with feet)	W: 210mm H: 460mm D: 428mm (with feet)	W: 210mm H: 349mm D: 372mm (with feet)
Weight	12.3 kg	7.5kg	6.8kg	6kg
Motherboard Support	Mini-ITX, Micro-ATX, ATX and EATX (Up to 272mm or 10.7-inches)	Mini-ITX, Micro-ATX, ATX	Mini-ITX, Micro-ATX, ATX	Mini-ITX
I/O Ports	1 x USB 3.1 Gen 2 Type-C 2 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack	1 x USB 3.1 Gen 2 Type-C 1 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack	1 x USB 3.1 Gen 2 Type-C 1 x USB 3.1 Gen 1 Type-A 1 x Headset Audio Jack	1 x USB 3.1 Gen 1 Type-A 1 x USB 3.1 Gen 2 Type-C 1 x Headset Audio Jack
Filters	All Air Intakes	All Air Intakes	All Air Intakes	All Air Intakes
Smart Device V2	3 x Fan channels with Max 10W per channel output* 2 x RGB LED channel, support up to 4 x HUE 2 addressable LED strips or 5 x Aer RGB fans Built-in noise detection module	3 x Fan channels with Max 10W per channel output* 2 x RGB LED channels, each support up to 4 x HUE 2 addressable LED strips or 5 x Aer RGB 2 fans Built-in noise detection module	3 x Fan channels with Max 10W per channel output* 2 x RGB LED channels, support up to 4 x HUE2 addressable LED strips or 5 x Aer RGB fans Built-in noise detection module	3 x Fan channels with Max 10W per channel output* 2 x RGB LED port support up to 4 x HUE 2 addressable LED strips or 5 x Aer RGB fans Built-in noise detection module
Expansion Slots	7	7	7	2
Drive Bays	2.5”: 7 3.5”: 2+1	2.5”: 2+1 3.5”: 2+1	2.5”: 2+1 3.5”: 2+1	2.5”: 3+1 3.5”: 1
Radiator Support	Front: 2 x 140 or 3 x 120mm with Push/Pull Top: 2 x 140 or 3 x 120mm Rear: 1 x 120	Front: 2 x 140 or 2 x 120mm with Pull Rear: 1 x 120mm	Front: 2 x 140 or 2 x 120mm with Pull Rear: 1 x 120mm	Front: 2 x 120 with Push/Pull Rear: 1 x 120mm
Fan Support	Front: 3 x 120/2 x 140mm (3 Aer F120 Case Version included) Top: 3 x 120/2 x 140mm Rear: 1 x 140 (1 Aer F140 Case Version included)	Front: 2 x 120/2 x 140mm (2 Aer RGB 2 140mm included) Top: 1 x 120/1 x 140mm (1 AER 140mm included) Rear: 1 x 120	Front: 2 x 120/2 x 140mm (1 Aer F120 Case Version included) Top: 1 x 120/1 x 140mm Rear: 1 x 120 (1 Aer F 120 Case Version included)	Front: 2 x 120/2 x 140mm Top: 1 x 120mm (1 Aer F120 Case Version included) Rear: 1 x 120mm (1 Aer F120 Case Version included)