GIGABYTE Z790 GAMING X DDR5 LGA 1700 Motherboard

GIGABYTE Z790 GAMING X DDR5 LGA 1700 Motherboard

• Intel Socket LGA 1700：Support 13th and 12th Gen Series Processors

• Unparalleled Performance：Twin 16*+2+１ Phases Digital VRM Solution

• Dual Channel DDR5：4*DIMMs with XMP 3.0 Memory Module Support

• Next Generation Storage：4*PCIe 4.0 x4 M.2 Connectors

• Advanced Thermal Design & M.2 Thermal Guard: To Ensure VRM Power Stability & M.2 SSD Performance

• EZ-Latch Plus：M.2 Connectors with Quick Release & Screwless Design

• Fast Networks：2.5GbE LAN

• Extended Connectivity：DP, HDM

  • CPU
    

    1. LGA1700 socket: Support for the 13th and 12th Generation Intel Core, Pentium Gold and Celeron Processors

    2. L3 cache varies with CPU

    (Please refer “CPU Support List” for more information.)

  • Chipset

    1. Intel Z790 Express Chipset

  • Memory

    1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules

    2. 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory

    3. Dual channel memory architecture

    4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

    5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

    6. Support for Extreme Memory Profile (XMP) memory modules

    (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” for more information.)

  • Onboard Graphics

    Integrated Graphics Processor-Intel HD Graphics support:

    1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz

       * Support for HDMI 2.0 version and HDCP 2.3.

    2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60

       * Support for DisplayPort 1.2 version and HDCP 2.3

    (Graphics specifications may vary depending on CPU support.)

  • Audio

    1. Realtek Audio CODEC

    2. High Definition Audio

    3. 2/4/5.1/7.1-channel

       * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

    4. Support for S/PDIF Out

  • LAN

    1. Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

  • Expansion Slots

    CPU:

    1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)

       * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

    Chipset:

    1. 1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)

    2. 1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)

  • Storage Interface

    CPU:

    1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

    Chipset:

    1. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)

    2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)

    3. 6 x SATA 6Gb/s connectors

       * Refer to “2-8 Internal Connectors,” for the installation notices for the M.2 and SATA connectors.

    RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
    RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

  • USB

    Chipset:

    1. 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2×2 support

    2. 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header

    3. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

    4. 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)

    Chipset+2 USB 2.0 Hubs:

    1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

  • Internal I/O Connectors

    1. 1 x 24-pin ATX main power connector

    2. 2 x 8-pin ATX 12V power connectors

    3. 1 x CPU fan header

    4. 1 x water cooling CPU fan header

    5. 3 x system fan headers

    6. 1 x system fan/water cooling pump header

    7. 2 x addressable LED strip headers

    8. 2 x RGB LED strip headers

    9. 4 x M.2 Socket 3 connectors

    10. 6 x SATA 6Gb/s connectors

    11. 1 x front panel header

    12. 1 x front panel audio header

    13. 1 x USB Type-C header, with USB 3.2 Gen 2 support

    14. 1 x USB 3.2 Gen 1 header

    15. 2 x USB 2.0/1.1 headers

    16. 2 x Thunderbolt add-in card connectors

    17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

    18. 1 x Q-Flash Plus button

    19. 1 x reset button

    20. 1 x reset jumper

    21. 1 x Clear CMOS jumper

  • Back Panel Connectors

    1. 4 x USB 2.0/1.1 ports

    2. 2 x USB 3.2 Gen 2 Type-A ports (red)

    3. 1 x DisplayPort

    4. 1 x HDMI 2.0 port

    5. 3 x USB 3.2 Gen 1 ports

    6. 1 x USB Type-C port, with USB 3.2 Gen 2×2 support

    7. 1 x RJ-45 port

    8. 1 x optical S/PDIF Out connector

    9. 2 x audio jacks

  • I/O Controller

    1. iTE I/O Controller Chip

  • H/W Monitoring

    1. Voltage detection

    2. Temperature detection

    3. Fan speed detection

    4. Water cooling flow rate detection

    5. Fan fail warning

    6. Fan speed control

       * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

  • BIOS

    1. 1 x 256 Mbit flash

    2. Use of licensed AMI UEFI BIOS

    3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

  • Unique Features

    1. Support for GIGABYTE Control Center (GCC)

       * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

    2. Support for Q-Flash

    3. Support for Q-Flash Plus

    4. Support for Smart Backup

  • Bundled Software

    1. Norton Internet Security (OEM version)

    2. LAN bandwidth management software

  • Operating System

    1. Support for Windows 11 64-bit

    2. Support for Windows 10 64-bit

  • Form Factor

    1. ATX Form Factor; 30.5cm x 24.4cm

  I, Front USB-C 10Gb/s, Rear USB-C 20Gb/s

• Smart Fan 6：Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP

• Q-Flash Plus：Update BIOS Without Installing the CPU, Memory and Graphics Card